Chapter 12 SNMP
GS1500-24P User’s Guide
98
Note: A total of 8 community strings can be set.
Figure 47 Configuration > SNMP > SNMP Setting
The following table describes the labels in this screen.
Table 30 Configuration > SNMP > SNMP Setting
LABEL DESCRIPTION
SNMP Setting
SNMP Status Select Enabled to activate SNMP on the Switch.
Select Disabled to not use SNMP on the Switch.
System Name Type a System Name for the Switch.
System
Location
Type a System Location for the Switch.
System Contact Type a System Contact for the Switch.
To Next Page
Loading...
