Chapter 6 WAN Network
LTE3202-M430 User’s Guide
36
Figure 19 Configuration > WAN Network > PIN Settings
The following table describes the labels in this screen.
6.4 The APN Configuration Screen
Use this screen to view or configure a connection profile. A connection profile defines the parameters
that you need to connect to a mobile network, such as the APN, user name and password. Click
Configuration > WAN network > APN Configuration. The screen appears as shown next.
Figure 20 Copnfiguration > WAN network > APN Configuration
Table 14 Configuration > WAN network > PIN Settings
LABEL DESCRIPTION
PIN Protection
Enable PIN
Protection
Select this to turn on PIN code authentication. Otherwise, click deselect the checkbox to turn off
PIN code authentication.
A PIN (Personal Identification Number) code is a key to a SIM card. Without the PIN code, you
cannot use the SIM card.
PIN Code Enter the default or existing PIN code for the inserted SIM card.
Apply Click Apply to save your changes back to the LTE3202-M430.
Cancel Click Cancel to reload the previous configuration for this screen.
To Next Page
Loading...
