Chapter 7 LAN
LTE3202-M430 User’s Guide
44
7.6 DNS Settings Screen
Click Router > DNS Settings to configure the LTE3202-M430’s DNS settings. The following screen displays.
Figure 30 Router > DNS Settings
DHCP range The LTE3202-M430 is pre-configured with a pool of 240 IP addresses starting from 192.168.0.10
to 192.168.0.250.
Specify the first and last of the contiguous addresses in the IP address range.
DHCP lease time This is the period of time DHCP-assigned addresses is used. DHCP automatically assigns IP
addresses to clients when they log in. DHCP centralizes IP address management on central
computers that run the DHCP server program. DHCP leases addresses, for a period of time,
which means that past addresses are “recycled” and made available for future
reassignment to other systems.
Apply Click Apply to save your changes back to the LTE3202-M430.
Cancel Click Cancel to reload the previous configuration for this screen.
Static DHCP List
Static IP This displays how many Static IP addresses are configured in the LTE3202-M430.
Add New Click Add New to create a new entry.
Delete all Click Delete All to remove all entries.
This field displays the index number of the static IP address entry.
IP Address This field displays the IP address that the LTE3202-M430 assigns to a device with the entry’s
MAC address.
MAC Address This field displays the MAC address of the device to which the LTE3202-M430 assigns the
entry’s IP address.
Action Click Edit to go to the screen where you can edit the static IP address.
Click Delete to remove the static IP address entry.
Apply Click this button to save your changes back to the LTE3202-M430.
Cancel Click Cancel to reload the previous configuration for this screen.
Table 19 Router > DHCP Server
LABEL DESCRIPTION
To Next Page
Loading...
