LTE3202-M430 User’s Guide
34
CHAPTER 6
WAN Network
6.1 Overview
This chapter discusses the LTE3202-M430’s WAN network screens. Use these screens to configure your
LTE3202-M430 for Internet access.
A WAN (Wide Area Network) connection is an outside connection to another network or the Internet. It
connects your private networks, such as a LAN (Local Area Network) and other networks, so that a
computer in one location can communicate with computers in other locations.
Figure 17 LAN/Wireless LAN and Wireless WAN
6.1.1 What You Can Do in this Chapter
• Use the Cellular Network screen to configure the WAN settings on the LTE3202-M430 for Internet
access (Section 6.2 on page 35).
• Use the PIN Settings screen to enable or disable PIN code authentication (Section 6.3 on page 35).
• Use the APN Configuration screen to configure user-defined connection profiles (Section 6.4 on page
36).
• Use the Network Selection screen to display available Public Land Mobile Networks and select a
preferred network for roaming (Section 6.5 on page 37).
• Use the Data Usage/Statistic screen to specify limiting the amount of the package data and view the
LTE3202-M430’s traffic statistics (Section 6.6 on page 38).
• Use the Operating Mode screen to change your LTE3202-M430 mode of operation (Section 6.7 on
page 39).
To Next Page
Loading...
