Chapter 12 Remote Management
LTE3202-M430 User’s Guide
80
12.3 The TR069 Screen
TR-069 defines how Customer Premise Equipment (CPE), for example your LTE3202-M430, can be
managed over the WAN by an Auto Configuration Server (ACS). TR-069 is based on sending Remote
Procedure Calls (RPCs) between an ACS and a client device. RPCs are sent in Extensible Markup
Language (XML) format over HTTP or HTTPS.
An administrator can use an ACS to remotely set up the LTE3202-M430, modify settings, perform firmware
upgrades as well as monitor and diagnose the LTE3202-M430. You have to enable the device to be
managed by the ACS and specify the ACS IP address or domain name and username and password.
Click Configuration > Remote Management > TR069 to open the following screen. Use this screen to
configure your LTE3202-M430 to be managed by an ACS.
Figure 56 Configuration > Remote Management > TR069
The following table describes the labels on this screen.
Apply Click Apply to save your changes back to the LTE3202-M430.
Cancel Click Cancel to reload the previous configuration for this screen.
Table 37 Configuration > Remote Management >
LABEL DESCRIPTION
Table 38 Configuration > Remote Management > TR069
LABEL DESCRIPTION
TR069
Enable TR069 Select the check box to enable TR069 on the LTE3202-M430.
ACS URL Enter the URL or IP address of the auto-configuration server.
To Next Page
Loading...
