LTE3202-M430 User’s Guide
69
Figure 46 Configuration > Firewall > URL Filter
The following table describes the labels in this screen.
9.6 IPv4/Port Filter Screen
The LTE3202-M430 firewall is a packet filtering firewall and restricts access based on the source/
destination computer network address of a packet and the type of application. Use this screen to
configure IP filtering rules. To access this screen, click Configuration > Firewall > IPv4/Port Filter.
Table 29 Configuration > Firewall > URL Filter
LABEL DESCRIPTION
URL filter
Enable URL Filter Select the check box to enable the rule.
URL Filtering
Policy
Select Whitelist to allow users to access the websites that match the filtering rules defined on this
screen. Select Blacklist to block users to access the websites that match the filtering rules
defined on this screen.
URL filter List
Add New Click Add New to create a new rule.
This field displays the rule index number.
Keywords of URL
or Domain
This field displays the keywords of URL or domain to which the LTE3202-M430 block or allow.
Action Click Edit to go to the screen where you can edit the filtering rule.
Click Delete to remove the filtering rule.
Apply Click Apply to save your changes back to the LTE3202-M430.
Cancel Click Cancel to reload the previous configuration for this screen.
To Next Page
Loading...
