LTE3202-M430 User’s Guide
41
CHAPTER 7
LAN
7.1 Overview
This chapter describes how to configure LAN settings.
A Local Area Network (LAN) is a shared communication system to which many computers are
attached. A LAN is a computer network limited to the immediate area, usually the same building or floor
of a building.
Figure 26 LAN Example
The LAN screens can help you configure a manage IP address, and partition your physical network into
logical networks.
7.2 What You Can Do
• Use the LAN IP screen to configure the LTE3202-M430’s LAN IP address (Section 7.4 on page 42).
• Use the DHCP Server screen to enable the DHCP server on the LTE3202-M430 (Section 7.5 on page 43).
• Use the DNS Settings screen to configure the LTE3202-M430’s DNS settings (Section 7.6 on page 44).
7.3 What You Need To Know
The actual physical connection determines whether the LTE3202-M430 ports are LAN or WAN ports.
There are two separate IP networks, one inside the LAN network and the other outside the WAN network
as shown next.
To Next Page
Loading...
