Chapter 6 WAN Network
LTE3202-M430 User’s Guide
38
The following table describes the labels in this screen.
6.6 Data Usage/Statistic Screen
This screen allows you to configure limiting the amount of the package data and view the LTE3202-
M430’s traffic statistics.
Click Configuration > WAN network > Data Usage/Statistic. The screen appears as shown next.
Figure 22 Configuration > WAN network > Data Usage/Statistic
Table 16 Configuration > WAN network > Network Selection
LABEL DESCRIPTION
Select PLMN
Mode
Select Auto to have the LTE3202-M430 automatically connect to the first available mobile
network using roaming when it is outside the coverage area of the original service provider’s
network.
Select Manual to display the network list and manually select a preferred network.
Apply Click Apply to save your changes back to the LTE3202-M430.
Cancel Click Cancel to reload the previous configuration for this screen.
To Next Page
Loading...
