ZyXEL Communications LTE3202-M430 - The Operation Mode Screen

Chapter 6 WAN Network
LTE3202-M430 User’s Guide
39
The following table describes the labels in this screen.
6.7 The Operation Mode Screen
The LTE3202-M430 supports two operation modes: Router Mode and Bridge Mode.
• Router mode: This is the default operating mode of the LTE3202-M430. Use the router mode if you want
to use routing functions, such as firewall, DHCP, NAT, and so on. The following figure shows an
example of the LTE3202-M430 in router mode.
Table 17 Configuration > WAN network > Data Usage/Statistic
LABEL DESCRIPTION
Package Data Limit Setting
Enable data
limit
Select the check box to enable data limits.
Total allowance Specify the limiting the amount of the package data (in GB) in this field.
Notify me when
data usage
reaches
Specify the reminding percentage of the package data usage in this field.
Reset date Specify the date that you want the LTE3202-M430 to restart calculating the amount of the
package data per month.
Apply Click Apply to save your changes back to the LTE3202-M430.
Reset Click Reset to reload the previous configuration for this screen.
Reset Network Statistics
Reset all of the
statistics and
history
Click Reset to remove all traffic statistics.
Current Connection Statistics
Data Flow This indicates the current traffic flow transmitting from/to the LTE3202-M430.
Sent This indicates the number of transmitted packets on the LTE3202-M430.
Received This indicates the number of received packets on the LTE3202-M430.
Current
Connection
Time
This indicates how long the LTE3202-M430 has been connected to a 4G/3G/2G network, this time
returns to 0 each time the LTE3202-M430 is rebooted.
Total Connection Statistics
From This displays the start month and date (mmdd) for the statistics.
Data Flow This indicates total traffic flows transmitting from/to the LTE3202-M430.
Sent This indicates the number of transmitted packets on the LTE3202-M430.
Received This indicates the number of received packets on the LTE3202-M430.
Total
Connection
Time
This indicates how long the LTE3202-M430 has been connected to a 4G/3G/2G network from the
first time this device is booted until the LTE3202-M430 is reset to factory-default settings.