ZyXEL Communications LTE3202-M430 - 7.4 The LAN IP Screen

Chapter 7 LAN
LTE3202-M430 User’s Guide
42
Figure 27 LAN and WAN IP Addresses
The LAN parameters of the LTE3202-M430 are preset in the factory with the following values:
• IP address of 192.168.1.1 with subnet mask of 255.255.255.0 (24 bits)
• DHCP server enabled with 32 client IP addresses starting from 192.168.1.33.
These parameters should work for the majority of installations. If your ISP gives you explicit DNS server
address(es), read the embedded Web Configurator help regarding what fields need to be configured.
7.4 The LAN IP Screen
To access this screen, click Configuration > LAN network > LAN IP. Use this screen to view or configure the
management IP address for your LTE3202-M430. Click Apply to save your changes back to the LTE3202-
M430, or click Cancel to reload the previous configuration for this screen.
Note: If you change the LTE3202-M430’s IP address, you need to use the new IP address to
access the LTE3202-M430’s web configurator.
Figure 28 Configuration > LAN network > LAN IP
LTE