Chapter 14 VoIP
LTE7410 User’s Guide
100
In this example dial plan (0 | [49]11 | 1 [2-9]xx xxxxxxx | 1 947 xxxxxxx !), you can dial “0” to call
the local operator, call 411 or 911, or make a long distance call with an area code starting from 2 to
9 in the US. The calls with the area code 947 will be dropped.
14.3 The SIP Account Screen
The LTE Device uses a SIP account to make outgoing VoIP calls and check if an incoming call’s
destination number matches your SIP account’s SIP number. In order to make or receive a VoIP
call, you need to enable and configure a SIP account, and map it to a phone port. The SIP account
contains information that allows your LTE Device to connect to your VoIP service provider.
See Section 14.4 on page 103 for how to map a SIP account to a phone port.
To access the following screen, click VoIP > SIP > SIP Account.
Figure 70 VoIP > SIP > SIP Account
The following table describes the labels in this screen.
14.3.1 Edit SIP Account
You can configure a SIP account. To access this screen, click the Edit icon next to an account.
Table 40 VoIP > SIP > SIP Account
LABEL DESCRIPTION
# This is the index number of the entry.
Active This shows whether the SIP account is activated or not.
A yellow bulb signifies that this SIP account is activated. A gray bulb signifies that this SIP
account is activated.
SIP Account
This shows the name of the SIP account.
Service Provider This shows the name of the SIP service provider.
Account No. This shows the SIP number.
Modify Click the Edit icon to configure the SIP account.
To Next Page
Loading...
