Chapter 4 Broadband
LTE7410 User’s Guide
25
APN
Access Point Name (APN) is a unique string which indicates an LTE network. An APN is required for
LTE stations to enter the LTE network and then the Internet.
4.1.3 Before You Begin
You may need to know your Internet access settings such as LTE APN, WAN IP address and SIM
card’s PIN code if the INTERNET light on your LTE Device is off. Get this information from your
service provider.
4.2 The Broadband Screen
The LTE Device must have a WAN interface to allow users to use the LTE connection to access the
Internet. Use the Broadband screen to manage WAN interfaces.
Click Network Setting > Broadband. The following screen opens.
Figure 11 Network Setting > Broadband
The following table describes the fields in this screen.
Table 2 Network Setting > Broadband
LABEL DESCRIPTION
Band Selection
LTE Band Select the LTE bands to use for the LTE Device’s WAN connection.
LTE Connections Table
# This is the index number of the connection.
Active This shows whether the LTE connection is activated.
Name This is the service name of the connection.
APN This field displays the name of the LTE network to which the LTE Device connects.
NAT This shows whether NAT is activated or not for this connection. NAT is not available
when the connection uses the bridging service.
Modify Click the Edit icon to configure the connection.
To Next Page
Loading...
