Chapter 15 System Monitor
LTE7410 User’s Guide
114
facility identifies a file in the syslog server. Refer to the documentation of your syslog program for
details. The following table describes the syslog severity levels.
15.2 The LTE Status Screen
Click System Monitor > LTE Status to open the LTE Status screen. Use the LTE Status screen
to see the present LTE Status in detail.
Figure 77 System Monitor > LTE Status
The following table describes the fields in this screen.
Table 46 Syslog Severity Levels
CODE SEVERITY
0 Emergency: The system is unusable.
1 Alert: Action must be taken immediately.
2 Critical: The system condition is critical.
3 Error: There is an error condition on the system.
4 Warning: There is a warning condition on the system.
5 Notice: There is a normal but significant condition on the system.
6 Informational: The syslog contains an informational message.
7 Debug: The message is intended for debug-level purposes.
Table 47 System Monitor > LTE Status
LABEL DESCRIPTION
Refresh Interval Specify how often you want the LTE Device to update this screen and click Set Interval to
apply the change. Click Stop to halt updating of the screen.
Device Status
LTE
Firmware
Version
This is the firmware version of the LTE Device.
To Next Page
Loading...
