Chapter 4 Broadband
LTE7410 User’s Guide
26
4.2.1 Edit LTE Connection
In Network Setting > Broadband, click the Edit icon next to an LTE connection to display the
following screen. Use this screen to configure an LTE WAN connection.
Figure 12 Network Setting > Broadband > LTE Interface Edit
The following table describes the fields in this screen.
Table 3 Network Setting > Broadband > LTE Interface Edit
LABEL DESCRIPTION
General
Active Select this to have the LTE Device use the LTE connection.
Name Specify the name for this WAN interface.
Auto APN Select Auto to have the LTE Device configure the APN (Access Point Name) of an LTE
network automatically. Otherwise, select Manual and enter the APN manually in the field
below.
Authentication Select this if your LTE service provider requires you to use a user name and password for
the LTE connection.
To Next Page
Loading...
