ZyXEL Communications LTE7410 - The WAN Traffic Status Screen

Chapter 15 System Monitor
LTE7410 User’s Guide
116
15.4 The WAN Traffic Status Screen
Click System Monitor > Traffic Status to open the WAN Traffic Status screen. You can view
the WAN traffic statistics in this screen.
Figure 79 System Monitor > Traffic Status > WAN
The following table describes the fields in this screen.
Clear Logs Click this to delete all the logs.
Export Click this to save a copy of the logs to your computer.
# This field is a sequential value and is not associated with a specific entry.
Time This field displays the time the log was recorded.
Level This field displays the severity level of the logs that the device is to send to this syslog
server.
Messages This field states the reason for the log.
Table 48 System Monitor > Log (continued)
LABEL DESCRIPTION
Table 49 System Monitor > Traffic Status > WAN
LABEL DESCRIPTION
Status This shows the number of bytes sent and received through the WAN interface of the LTE
Device.
Refresh Interval Specify how often you want the LTE Device to update this screen and click Set Interval to
apply the change. Click Stop to halt updating of the screen.
Connected
Interface
This shows the name of all the WAN interfaces.
Packets Sent
Data This indicates the number of transmitted packets on this interface.
Error This indicates the number of frames with errors transmitted on this interface.
Drop This indicates the number of outgoing packets dropped on this interface.
Packets Received
Data This indicates the number of received packets on this interface.
Error This indicates the number of frames with errors received on this interface.
Drop This indicates the number of received packets dropped on this interface.