LTE7410 User’s Guide
140
CHAPTER 24
Diagnostic
24.1 Overview
You can use different diagnostic methods to test a connection and see the detailed information.
These read-only screens display information to help you identify problems with the LTE Device.
24.2 The Ping/TraceRoute Screen
Ping and traceroute help check availability of remote hosts and also help troubleshoot network or
Internet connections. Click Maintenance > Diagnostic to open the Ping/TraceRoute screen
shown next.
Figure 97 Maintenance > Diagnostic > Ping/TraceRoute
The following table describes the fields in this screen.
Table 64 Maintenance > Diagnostic > Ping/TraceRoute
LABEL DESCRIPTION
PingV4 Type the IPv4 address of a computer that you want to ping in order to test a connection. Click
PingV4 and the ping statistics will show in the diagnostic .
PingV6 Type the IPv6 address of a computer that you want to ping in order to test a connection. Click
PingV6 and the ping statistics will show in the diagnostic .
TraceRouteV4 Click this button to perform the IPv4 traceroute function. This determines the path a packet
takes to the specified host.
TraceRouteV6 Click this button to perform the IPv6 traceroute function. This determines the path a packet
takes to the specified host.
To Next Page
Loading...
