LTE7410 User’s Guide
121
CHAPTER 17
TR-069 Client
17.1 Overview
This chapter explains how to configure the LTE Device’s TR-069 auto-configuration settings.
17.2 The TR-069 Client Screen
TR-069 defines how Customer Premise Equipment (CPE), for example your LTE Device, can be
managed over the WAN by an Auto Configuration Server (ACS). TR-069 is based on sending
Remote Procedure Calls (RPCs) between an ACS and a client device. RPCs are sent in Extensible
Markup Language (XML) format over HTTP or HTTPS.
An administrator can use an ACS to remotely set up the LTE Device, modify settings, perform
firmware upgrades as well as monitor and diagnose the LTE Device. You have to enable the device
to be managed by the ACS and specify the ACS IP address or domain name and username and
password.
Click Maintenance > TR-069 Client to open the following screen. Use this screen to configure
your LTE Device to be managed by an ACS.
Figure 84 Maintenance > TR-069 Client
To Next Page
Loading...
