LTE7410 User’s Guide
91
CHAPTER 14
VoIP
14.1 Overview
Use this chapter to:
• Connect an analog phone to the LTE Device.
• Make phone calls over the Internet, as well as the regular phone network.
• Configure settings such as speed dial.
• Configure network settings to optimize the voice quality of your phone calls.
14.1.1 What You Can Do in this Chapter
These screens allow you to configure your LTE Device to make phone calls over the Internet and
your regular phone line, and to set up the phones you connect to the LTE Device.
•Use the SIP Service Provider screens to configure the SIP server information, and the numbers
for certain phone functions (Section 14.2 on page 93).
•Use the SIP Account screens to set up information about your SIP account, control which SIP
accounts the phones connected to the LTE Device use and configure audio settings such as
volume levels for the phones connected to the ZyXEL Device (Section 14.3 on page 100).
•Use the Phone screen to change settings that depend on the country you are in (Section 14.4 on
page 103).
•Use the Call Rule screen to set up shortcuts for dialing frequently-used (VoIP) phone numbers
(Section 14.5 on page 104).
You don’t necessarily need to use all these screens to set up your account. In fact, if your service
provider did not supply information on a particular field in a screen, it is usually best to leave it at
its default setting.
14.1.2 What You Need to Know
The following terms and concepts may help as you read this chapter.
VoIP
VoIP stands for Voice over IP. IP is the Internet Protocol, which is the message-carrying standard
the Internet runs on. So, Voice over IP is the sending of voice signals (speech) over the Internet (or
another network that uses the Internet Protocol).
To Next Page
Loading...
