Chapter 5 Home Networking
LTE7410 User’s Guide
33
5.3 The IPv6 LAN Setup Screen
Use this screen to configure the IPv6 settings for your LTE Device’s LAN interface.
IP Pool Starting
Address
This field specifies the first of the contiguous addresses in the IP address pool.
Pool Size This field specifies the size, or count of the IP address pool.
DHCP Server Lease Time
Lease Time DHCP server leases an address to a new device for a period of time, called the DHCP
lease time. When the lease expires, the DHCP server might assign the IP address to a
different device.
DNS Values
DNS Server 1-2 The LTE Device supports DNS proxy by default. The LTE Device sends out its own LAN IP
address to the DHCP clients as the first DNS server address. DHCP clients use this first
DNS server to send domain-name queries to the LTE Device. The LTE Device sends a
response directly if it has a record of the domain-name to IP address mapping. If it does
not, the LTE Device queries an outside DNS server and relays the response to the DHCP
client.
Select Obtained From ISP if your ISP dynamically assigns DNS server information
(and the LTE Device's WAN IP address).
Select UserDefined if you have the IP address of a DNS server. Enter the DNS server's
IP address in the field to the right.
Select DNS Proxy to have the DHCP clients use the LTE Device’s own LAN IP address.
The LTE Device works as a DNS relay.
Select None to not configure extra DNS servers.
Apply Click Apply to save your changes.
Cancel Click Cancel to restore your previously saved settings.
Table 6 Network Setting > Home Networking > LAN Setup (continued)
LABEL DESCRIPTION
To Next Page
Loading...
