ZyXEL Communications LTE7410 - Page 127

Chapter 20 Log Setting
LTE7410 User’s Guide
127
The following table describes the fields in this screen.
Table 57 Maintenance > Log Setting
LABEL DESCRIPTION
Syslog Settings
Syslog Logging Select the Active check box to enable syslog logging.
Mode Select Local File to have the LTE Device save the log file locally.
Select Local File and Remote to have the LTE Device save the log file locally and send it
to an external syslog server.
Syslog Server IP
Address
Enter the server name or IP address of the syslog server that will log the selected
categories of logs.
Syslog Server
UDP Port
Enter the port number used by the syslog server.
Active Log and Select Level
Log Category Select the categories of logs that you want to record.
Log Level Select the severity level of logs that you want to record. If you want to record all logs,
select ALL.
Relay LTE Modem Log to PC
LTE Modem
Relay Log
Select Enable to redirect LTE modem logs to the LAN computer that you specify below.
Log Server Enter the IP address of the LAN computer that you want to use for collecting LTE modem
logs.
Apply Click Apply to save your changes.
Cancel Click Cancel to restore your previously saved settings.