Chapter 7 Wireless
NXC Series User’s Guide
108
Figure 53 Configuration > Wireless > MON Mode
Each field is described in the following table.
Table 55 Configuration > Wireless > MON Mode
LABEL DESCRIPTION
General Settings
Enable Rogue AP
Containment
Select this to enable rogue AP containment.
Rogue/Friendly AP List
Add Click this button to add an AP to the list and assign it either friendly or rogue
status.
Edit Select an AP in the list to edit and reassign its status.
Remove Select an AP in the list to remove.
Containment Click this button to quarantine the selected AP.
A quarantined AP cannot grant access to any network services. Any stations that
attempt to connect to a quarantined AP are disconnected automatically.
Dis-Containment Click this button to take the selected AP out of quarantine.
An unquarantined AP has normal access to the network.
# This field is a sequential value, and it is not associated with any interface.
Containment This field indicates the selected AP’s containment status.
Role This field indicates whether the selected AP is a rogue-ap or a friendly-ap. To
change the AP’s role, click the Edit button.
MAC Address This field indicates the AP’s radio MAC address.
Description This field displays the AP’s description. You can modify this by clicking the Edit
button.
Rogue/Friendly AP List
Importing/Exporting
These controls allow you to export the current list of rogue and friendly APs or
import existing lists.
To Next Page
Loading...
