Chapter 5 Monitor
NXC Series User’s Guide
58
5.3.1 Port Statistics Graph
Use the port statistics graph to look at a line graph of packet statistics for each physical port. To
view, click Monitor > System Status > Port Statistics and then the Switch to Graphic View
Button.
# This field displays the port’s number in the list.
Port This field displays the physical port number.
Status This field displays the current status of the physical port.
Down - The physical port is not connected.
Speed / Duplex - The physical port is connected. This field displays the port speed and
duplex setting (Full or Half).
TxPkts This field displays the number of packets transmitted from the NXC on the physical port
since it was last connected.
RxPkts This field displays the number of packets received by the NXC on the physical port since it
was last connected.
Collisions This field displays the number of collisions on the physical port since it was last connected.
Tx B/s This field displays the transmission speed, in bytes per second, on the physical port in the
one-second interval before the screen updated.
Rx B/s This field displays the reception speed, in bytes per second, on the physical port in the
one-second interval before the screen updated.
Up Time This field displays how long the physical port has been connected.
System Up Time This field displays how long the NXC has been running since it last restarted or was turned
on.
Table 24 Monitor > System Status > Port Statistics (continued)
LABEL DESCRIPTION
To Next Page
Loading...
