Chapter 5 Monitor
NXC Series User’s Guide
82
The following table describes the labels in this screen.
5.14 Station List
Use this screen to view statistics pertaining to the associated stations (or “wireless clients”). Click
Monitor > Wireless > Station Info > Station List to access this screen.
Figure 39 Monitor > Wireless > Station Info > Station List
Table 41 Monitor > Wireless > ZyMesh > ZyMesh Link Info
LABEL DESCRIPTION
# This is the index number of the managed AP (in repeater mode) in this list.
Description This is the descriptive name of the managed AP (in repeater mode).
IP Address This is the IP address of the managed AP (in repeater mode).
MAC Address This is the MAC address of the managed AP (in repeater mode).
Root AP MAC This is the MAC address of the root AP to which the managed AP is connected wirelessly.
Hop This is the hop count of the managed AP. For example, “1” means the managed AP is
connected to a root AP directly. “2” means there is another repeater AP between the
managed AP and the root AP.
Uplink AP Role This shows whether the managed AP to which this managed AP is connected wirelessly is
acting as a root AP or repeater in a ZyMesh.
Uplink AP Info This shows the information about the managed AP to which this managed AP is connected
wirelessly.
SSID Name This indicates the name of the wireless network (SSID) the managed AP uses to associated
with another managed AP.
Signal Strength This is the signal strength of the wireless connection between the managed AP and a root
AP or repeater.
Tx Rate This is the maximum transmission rate of the root AP or repeater to which the managed AP
is connected.
Rx Rate This is the maximum reception rate of the root AP or repeater to which the managed AP is
connected.
Link Up Time This displays the time the managed AP first associated with the root AP or repeater.
To Next Page
Loading...
