Chapter 5 Monitor
NXC Series User’s Guide
59
Figure 25 Monitor > System Status > Port Statistics > Switch to Graphic View
The following table describes the labels in this screen.
5.4 Interface Status
This screen lists all of the NXC’s interfaces and gives packet statistics for them. If you enabled IPv6
in the Configuration > System > IPv6 screen, you can also view your IPv6 interface status on
this screen. Click Monitor > System Status > Interface Status to access this screen.
Table 25 Monitor > System Status > Port Statistics > Switch to Graphic View
LABEL DESCRIPTION
Refresh Interval Enter how often you want this window to be automatically updated.
Refresh Now Click this to update the information in the window right away.
Port Selection Select the number of the physical port for which you want to display graphics.
Switch to Grid
View
Click this to display the port statistics as a table.
Mbps The y-axis represents the speed of transmission or reception.
time The x-axis shows the time period over which the transmission or reception occurred
TX This line represents traffic transmitted from the NXC on the physical port since it was last
connected.
RX This line represents the traffic received by the NXC on the physical port since it was last
connected.
Last Update This field displays the date and time the information in the window was last updated.
To Next Page
Loading...
