ZyXEL Communications NXC2500 - Add;Edit DHCPv6 Request Object

Chapter 27 DHCPv6
NXC Series User’s Guide
287
27.2.1 Add/Edit DHCPv6 Request Object
The Request Add/Edit screen allows you to create a new request object or edit an existing one.
To access this screen, go to the Request screen and click either the Add icon or an Edit icon.
Figure 164 Configuration > Object > DHCPv6 > Request > Add
The following table describes the labels in this screen.
Object Reference Select an entry and click Object Reference to open a screen that shows which settings
use the entry.
# This field is a sequential value, and it is not associated with a specific object.
Name This field displays the name of each request object.
Type This field displays the request type of each request object.
Interface This field displays the interface used for each request object.
Value This field displays the value for each request object.
Table 148 Configuration > Object > DHCPv6 > Request (continued)
LABEL DESCRIPTION
Table 149 Configuration > Object > DHCPv6 > Request > Add/Edit
LABEL DESCRIPTION
Name Type the name for this request object. You may use 1-31 alphanumeric characters,
underscores(_), or dashes (-), but the first character cannot be a number. This value is
case-sensitive.
Request Type Select the request type for this request object. You can choose from DNS Server, or NTP
Server.
Interface Select the interface for this request object.
OK Click OK to save your changes back to the NXC.
Cancel Click Cancel to exit this screen without saving your changes.