Chapter 28 System
NXC Series User’s Guide
327
Figure 195 Configuration > System > Language
The following table describes the labels in this screen.
28.14 IPv6
Click Configuration > System > IPv6 to open the following screen. Use this screen to enable
IPv6 support on the NXC.
Figure 196 Configuration > System > IPv6
The following table describes the labels in this screen.
Table 170 Configuration > System > Language
LABEL DESCRIPTION
Language Setting Select a display language for the NXC’s Web Configurator screens. You also need to open
a new browser session to display the screens in the new language.
Apply Click Apply to save your changes back to the NXC.
Reset Click Reset to return the screen to its last-saved settings.
Table 171 Configuration > System > IPv6
LABEL DESCRIPTION
Enable IPv6 Select this to have the NXC support IPv6 and make IPv6 settings be available on the
screens that the functions support, such as the Configuration > Network > Interface
> Ethernet, and VLAN screens. The NXC discards all IPv6 packets if you clear this check
box.
Apply Click Apply to save your changes back to the NXC.
Reset Click Reset to return the screen to its last-saved settings.
To Next Page
Loading...
