NXC Series User’s Guide
286
CHAPTER 27
DHCPv6
27.1 Overview
This chapter describes how to configure DHCPv6 request type objects.
27.1.1 What You Can Do in this Chapter
The Request screen (Section 27.2 on page 286) allows you to configure DHCPv6 request type
objects.
27.2 DHCPv6 Request
The Request screen allows you to add, edit, and remove DHCPv6 request type objects. To access
this screen, click Configuration > Object > DHCPv6 > Request.
Figure 163 Configuration > Object > DHCPv6 > Request
The following table describes the labels in this screen.
Table 148 Configuration > Object > DHCPv6 > Request
LABEL DESCRIPTION
Configuration
Add Click this to create a new entry.
Edit Double-click an entry or select it and click Edit to open a screen where you can modify the
entry’s settings.
Remove To remove an entry, select it and click Remove. The NXC confirms you want to remove it
before doing so.
Note: You cannot delete an entry which is in use.
To Next Page
Loading...
