Chapter 5 Monitor
NXC Series User’s Guide
65
5.6 Session Monitor
This screen displays information about active sessions for debugging or statistical analysis. It is not
possible to manage sessions in this screen. The following information is displayed.
• User who started the session
• Protocol or service port used
• Source IP address
• Destination IP address
• Number of bytes received (so far)
• Number of bytes transmitted (so far)
• Duration (so far)
You can look at all the active sessions by user, service, source IP address, or destination IP address.
You can also filter the information by user, protocol / service or service group, source address, and/
or destination address and view it by user.
Click Monitor > System Status > Session Monitor to display the following screen.
Figure 28 Monitor > System Status > Session Monitor
To Next Page
Loading...
