Chapter 28 System
NXC Series User’s Guide
290
Figure 166 Configuration > System > USB Storage
The following table describes the labels in this screen.
28.4 Date and Time
For effective scheduling and logging, the NXC system time must be accurate. The NXC’s Real Time
Chip (RTC) keeps track of the time and date. There is also a software mechanism to set the time
manually or get the current time and date from an external server.
Table 151 Configuration > System > USB Storage
LABEL DESCRIPTION
Activate USB
storage service
Select this if you want to use the connected USB device(s).
Disk full warning
when remaining
space is less than
Set a number and select a unit (MB or %) to have the NXC send a warning message
when the remaining USB storage space is less than the value you set here.
Apply Click Apply to save your changes back to the NXC.
Reset Click Reset to return the screen to its last-saved settings.
To Next Page
Loading...
