Chapter 5 Monitor
NXC Series User’s Guide
74
5.11.2 Config AP
Use this screen to change the group and radio, VLAN, and port settings of the connected AP. To
access this screen, select an entry and click the Config AP button in the AP List screen.
Status This field displays the current status of each physical port on the AP.
Down - The port is not connected.
Speed / Duplex - The port is connected. This field displays the port speed and duplex
setting (Full or Half).
PVID This shows the port’s PVID.
A PVID (Port VLAN ID) is a tag that adds to incoming untagged frames received on a port
so that the frames are forwarded to the VLAN group that the tag defines.
Up Time This field displays how long the physical port has been connected.
VLAN
Configuration
Name This shows the name of the VLAN.
Status This displays whether or not the VLAN is activated.
VID This shows the VLAN ID number.
Member This field displays the Ethernet port(s) that is a member of this VLAN.
Station Count The y-axis represents the number of connected stations.
Time The x-axis shows the time over which a station was connected.
Last Update This field displays the date and time the information in the window was last updated.
Table 36 Monitor > Wireless > AP Information > AP List > AP Information (continued)
LABEL DESCRIPTION
To Next Page
Loading...
