Chapter 10 Zones
NXC Series User’s Guide
150
Figure 75 Network > Zone > Add/Edit
The following table describes the labels in this screen.
Table 74 Network > Zone > Add/Edit
LABEL DESCRIPTION
Name Type the name used to refer to the zone. You may use 1-31 alphanumeric characters,
underscores(
_), or dashes (-), but the first character cannot be a number. This value is
case-sensitive.
Block Intra-zone
Traffic
Select this check box to block network traffic between members in the zone.
Member List Available lists the interfaces that do not belong to any zone. Select the interfaces that
you want to add to the zone you are editing, and click the right arrow button to add
them.
Member lists the interfaces that belong to the zone. Select any interfaces that you want
to remove from the zone, and click the left arrow button to remove them.
OK Click OK to save your customized settings and exit this screen.
Cancel Click Cancel to exit this screen without saving.
To Next Page
Loading...
