Chapter 13 IP/MAC Binding
NXC Series User’s Guide
164
Figure 87 Configuration > Network > IP/MAC Binding > Exempt List
The following table describes the labels in this screen.
Table 81 Configuration > Network > IP/MAC Binding > Exempt List
LABEL DESCRIPTION
Add Click this to create a new entry.
Edit Click an entry or select it and click Edit to modify the entry’s settings.
Remove To remove an entry, select it and click Remove. The NXC confirms you want to remove it
before doing so.
# This is the index number of the IP/MAC binding list entry.
Name Enter a name to help identify this entry.
Start IP Enter the first IP address in a range of IP addresses for which the NXC does not apply IP/
MAC binding.
End IP Enter the last IP address in a range of IP addresses for which the NXC does not apply IP/
MAC binding.
Apply Click Apply to save your changes back to the NXC.
To Next Page
Loading...
