Chapter 18 AP Profile
NXC Series User’s Guide
229
Figure 129 Configuration > Object > AP Profile > SSID > Layer-2 Isolation List
The following table describes the labels in this screen.
18.3.4.1 Add/Edit Layer-2 Isolation Profile
This screen allows you to create a new layer-2 isolation profile or edit an existing one. To access
this screen, click the Add button or select a layer-2 isolation profile from the list and click the Edit
button.
Note: You need to know the MAC address of each device that you want to allow to be
accessed by other devices in the SSID to which the layer-2 isolation profile is
applied.
Table 117 Configuration > Object > AP Profile > SSID > Layer-2 Isolation List
LABEL DESCRIPTION
Add Click this to add a new layer-2 isolation profile.
Edit Click this to edit the selected layer-2 isolation profile.
Remove Click this to remove the selected layer-2 isolation profile.
Object Reference Click this to view which other objects are linked to the selected layer-2 isolation profile (for
example, SSID profile).
# This field is a sequential value, and it is not associated with a specific profile.
Profile Name This field indicates the name assigned to the layer-2 isolation profile.
To Next Page
Loading...
