Chapter 20 ZyMesh Profile
NXC Series User’s Guide
239
The following table describes the labels in this screen.
Table 122 Configuration > Object > ZyMesh Profile > Add/Edit ZyMesh Profile
LABEL DESCRIPTION
Profile Name Enter up to 31 alphanumeric characters for the profile name.
ZyMesh SSID Enter the SSID with which you want the managed AP to connect to a root AP or
repeater to build a ZyMesh link.
Note: The ZyMesh SSID is hidden in the outgoing beacon frame so a wireless device
cannot obtain the SSID through scanning using a site survey tool.
Pre-Shared Key Enter a pre-shared key of between 8 and 63 case-sensitive ASCII characters (including
spaces and symbols) or 64 hexadecimal characters.
The key is used to encrypt the wireless traffic between the APs.
OK Click OK to save your changes back to the NXC.
Cancel Click Cancel to exit this screen without saving your changes.
To Next Page
Loading...
