Chapter 3 The Web Configurator
NXC Series User’s Guide
33
Console
The Console allows you to use CLI commands from directly within the Web Configurator rather than
having to use a separate terminal program. In addition to logging in directly to the NXC’s CLI, you
can also log into other devices on the network through this Console. It uses SSH to establish a
connection.
Note: To view the functions in the Web Configurator user interface that correspond
directly to specific NXC CLI commands, use the CLI Messages window (see CLI
Messages on page 36) in tandem with this one.
Figure 13 Console
Priority If it is applicable, this field lists the referencing configuration item’s position in its list,
otherwise N/A displays.
Name This field identifies the configuration item that references the object.
Description If the referencing configuration item has a description configured, it displays here.
Refresh Click this to update the information in this screen.
Cancel Click Cancel to close the screen.
Table 11 Object References (continued)
LABEL DESCRIPTION
To Next Page
Loading...
