Chapter 30 File Manager
NXC Series User’s Guide
352
Click Maintenance > File Manager > Shell Script to open this screen. Use the Shell Script
screen to store, name, download, upload and run shell script files. You can store multiple shell
script files on the NXC at the same time.
Note: You should include write commands in your scripts. If you do not use the write
command, the changes will be lost when the NXC restarts. You could use multiple
write commands in a long script.
Figure 209 Maintenance > File Manager > Shell Script
Each field is described in the following table.
Table 181 Maintenance > File Manager > Shell Script
LABEL DESCRIPTION
Rename Use this button to change the label of a shell script file on the NXC.
You cannot rename a shell script to the name of another shell script in the NXC.
Click a shell script’s row to select it and click Rename to open the Rename File screen.
Specify the new name for the shell script file. Use up to 25 characters (including a-zA-Z0-
9;‘~!@#$%^&()_+[]{}’,.=-).
Click OK to save the duplicate or click Cancel to close the screen without saving a duplicate of
the configuration file.
Remove Click a shell script file’s row to select it and click Delete to delete the shell script file from the
NXC.
A pop-up window asks you to confirm that you want to delete the shell script file. Click OK to
delete the shell script file or click Cancel to close the screen without deleting the shell script file.
Download Click a shell script file’s row to select it and click Download to save the configuration to your
computer.
To Next Page
Loading...
