Chapter 4 Dashboard
NXC Series User’s Guide
50
Memory Usage This field displays what percentage of the NXC’s RAM is currently being used. Hover
your cursor over this field to display the Show Memory Usage icon that takes you to a
chart of the NXC’s recent memory usage.
Flash Usage This field displays what percentage of the NXC’s onboard flash memory is currently
being used.
USB Storage
Usage
This field shows how much storage in the USB device connected to the NXC is in use.
Active Sessions This field displays how many traffic sessions are currently open on the NXC. These are
the sessions that are traversing the NXC. Hover your cursor over this field to display
icons. Click the Detail icon to go to the Session Monitor screen to see details about
the active sessions. Click the Show Active Sessions icon to display a chart of NXC’s
recent session usage.
Interface Status
Summary
Name This field displays the name of each interface.
Status This field displays the current status of each interface. The possible values depend on
what type of interface it is.
Inactive - The Ethernet interface is disabled.
Down - The Ethernet interface is enabled but not connected.
Speed / Duplex - The Ethernet interface is enabled and connected. This field displays
the port speed and duplex setting (Full or Half).
Zone This field displays the zone to which the interface is currently assigned.
IP Addr/
Netmask
This field displays the current IP address and subnet mask assigned to the interface. If
the IP address is 0.0.0.0, the interface is disabled or did not receive an IP address and
subnet mask via DHCP.
IP Assignment This field displays how the interface gets its IP address.
Static - This interface has a static IP address.
DHCP Client - This interface gets its IP address from a DHCP server.
Action Use this field to get or to update the IP address for the interface.
Click Renew to send a new DHCP request to a DHCP server.
The Latest Alert
Logs
This section of the screen displays recent logs generated by the NXC.
# This is the entry’s rank in the list of alert logs.
Time This field displays the date and time the log was created.
Priority This field displays the severity of the log.
Category This field displays the type of log generated.
Message This field displays the actual log message.
Source This field displays the source address (if any) in the packet that generated the log.
Destination This field displays the destination address (if any) in the packet that generated the log.
AP Information This shows a summary of connected wireless Access Points (APs).
All AP This section displays a summary for all connected wireless APs. Click the link to go to
the AP information > AP List screen.
Online
Management AP
This displays the number of currently connected management APs.
Offline
Management AP
This displays the number of currently offline managed APs.
Table 18 Dashboard (continued)
LABEL DESCRIPTION
To Next Page
Loading...
