Chapter 23 Logs
PMG5318-B20B User’s Guide
113
23.2 System Log
Use the System Log screen to see the system logs. Click Management > System Log > View
System Log to open the System Log screen.
Figure 91 System Log
23.3 System Log Configuration
To change your GPON Device’s log settings, click Management > System Log > Configure
System Log. The screen appears as shown.
Table 80 System Log
LABEL DESCRIPTION
Date/Time This field displays when the log was recorded.
Facility The log facility allows you to send logs to different files in the syslog server. Refer to the
documentation of your syslog program for more details.
Severity This field displays the severity level of the logs that the device is to send to this syslog
server.
Messages This field states the reason for the log.
Refresh Click this to renew the log screen.
Close Click this to close the log screen.
To Next Page
Loading...
