ZyXEL Communications PMG5318-B20B - TR-069 Client

PMG5318-B20B User’s Guide
118
CHAPTER 25
TR-069 Client
25.1 TR-069 Client
Click Management > TR-069 Client to open the following screen. Use this screen to configure
your GPON Device to be managed by an ACS (Auto Configuration Server).
Figure 96 TR-069 Client
Table 84 TR-069 Client
LABEL DESCRIPTION
Inform Select Enable for the GPON Device to send periodic inform via TR-069 on the WAN.
Otherwise, select Disable.
Inform Interval Enter the time interval (in seconds) at which the GPON Device sends information to
the auto-configuration server.
ACS URL Enter the URL or IP address of the auto-configuration server.
ACS User Name Enter the TR-069 user name for authentication with the auto-configuration server.
ACS Password Enter the TR-069 password for authentication with the auto-configuration server.