PMG5318-B20B User’s Guide
89
CHAPTER 19
Wireless
19.1 Wireless Basic
Use the Advanced Setup > Wireless screens to configure the 2.4 GHz wireless network.
Click Advanced Setup > Wireless to enable or disable the 2.4 GHz Wireless LAN and configure
basic settings.
Note: If you are configuring the GPON Device from a computer connected to the wireless
LAN and you change the GPON Device’s SSID or security settings, you will lose
your wireless connection when you click Apply/Save to confirm. You must then
change the wireless settings of your computer to match the GPON Device’s new
settings.
Figure 74 Wireless Basic
To Next Page
Loading...
