Chapter 5 LAN
PMG5318-B20B User’s Guide
38
Figure 25 Add DHCP Static IP Lease
5.2 IPv6 LAN Auto Configuration
Click Advanced Setup > LAN > IPv6 Autoconfig to open the IPv6 LAN Auto Configuration
screen. Use this screen to set the LAN interface IPv6 settings.
Table 21 Add DHCP Static IP Lease
LABEL DESCRIPTION
MAC Address Enter the MAC address of a computer on your LAN.
Every Ethernet device has a unique MAC (Media Access Control) address. The MAC
address is assigned at the factory and consists of six pairs of hexadecimal characters, for
example, 00:A0:C5:00:00:02.
IP Address Enter the IP address that you want to assign to the computer on your LAN with the MAC
address that you will also specify.
Apply/Save Click this button to save your changes and go back to the previous screen.
To Next Page
Loading...
