Chapter 19 Wireless
PMG5318-B20B User’s Guide
95
19.5 Wireless Advanced
Click Wireless > Advanced to configure advanced wireless settings.
Table 70 Wireless Bridge
LABEL DESCRIPTION
Bridge Restrict Select Disabled to not restrict which APs can establish a wireless bridge connection with
the GPON Device. Any AP that has activated the wireless bridge function can establish a
connection with the GPON Device.
Select Enabled or Enabled (Scan) to only allow APs selected in the Remote Bridges
MAC Address section to establish a wireless bridge connection with the GPON Device.
Select Enabled and enter the MAC addresses of the peer devices in the Remote
Bridges MAC Address field that displays. Type the MAC address of the peer device in a
valid MAC address format (six hexadecimal character pairs, for example
12:34:56:78:9a:bc).
Select Enabled (Scan) to search for a list of nearby SSIDs and their associated MAC
addresses. Choose the APs and click Apply/Save. Click Refresh to update the list.
Note: The GPON Device can support up to 4 bridge links.
Save/Apply Click this to save and apply your changes.
To Next Page
Loading...
