Chapter 23 Logs
PMG5318-B20B User’s Guide
114
Figure 92 System Log Configuration
23.4 Security Log
Click Management > Security Log > View to see the system logs.
Table 81 System Log Configuration
LABEL DESCRIPTION
Log Select Enable to have the GPON Device log events.
Log Level Select the severity level of events to log.
Display Level Select the severity level of events to display in the log.
Mode Select the syslog destination from the drop-down list box.
Select Remote, the log(s) to send logs only to a remote syslog server. Select Local to save
the logs in a local file. To send the log(s) to a remote syslog server and save it in a local file,
select Both.
Server IP
Address
Enter the IP address of the syslog server that will log the selected categories of logs.
Server UDP
Port
Enter the port number used by the syslog server.
Apply/Save Click this button to save your changes.
To Next Page
Loading...
