Chapter 19 Wireless
PMG5318-B20B User’s Guide
93
19.3 Wireless MAC Filter
Click Wireless > MAC Filter to open the MAC Filter screen. This screen allows you to configure
the GPON Device to give exclusive access to specific devices (Allow) or exclude specific devices
from accessing the GPON Device (Deny). Every Ethernet device has a unique MAC (Media Access
Control) address assigned at the factory. It consists of six pairs of hexadecimal characters, for
example, 00:A0:C5:00:00:02. You need to know the MAC addresses of the devices to configure this
screen.
Figure 76 Wireless MAC Filter
19.3.1 Wireless MAC Filter Add
Click Wireless > MAC Filter > Add to add a MAC address filter entry.
Table 68 Wireless MAC Filter
LABEL DESCRIPTION
Select SSID Select an SSID for which to configure MAC filter settings.
MAC Restrict
Mode
Define the filter action for the list of MAC addresses in the MAC Address table.
Select Disabled to turn off MAC filtering.
Select Allow to permit access to the GPON Device. MAC addresses not listed will be denied
access to the GPON Device.
Select Deny to block access to the GPON Device. MAC addresses not listed will be allowed
to access the GPON Device.
MAC Address This displays the MAC addresses of the wireless devices that are allowed or denied access to
the GPON Device.
Remove Select entries and click the Remove button to delete them.
Add Click this to add a new MAC address entry to the table.
To Next Page
Loading...
