PMG5318-B20B User’s Guide
57
CHAPTER 9
Routing
9.1 Default Gateway
Click Advanced Setup > Routing > Default Gateway to open the Default Gateway screen.
Use this screen to select WAN interfaces to serve as system default gateways.
Figure 42 Default Gateway
Move the WAN interfaces to serve as system default gateways from Available Routed WAN
Interfaces to Selected Default Gateway Interfaces.
Use the Selected WAN Interface field to select the preferred WAN interface to server as the
GPON Device’s default IPv6 gateway.
Click Apply/Save to save your changes.
To Next Page
Loading...
