Chapter 14 Remote Management
PMG5318-B20B User’s Guide
71
The following table describes the fields in this screen.
Table 52 Remote Management
LABEL DESCRIPTION
Enable Remote
Management
Select this to allow management connections to the GPON Device.
Trust Domain
IP
Enter a WAN (public) IP address from which to allow users to access the GPON Device.
HTTP Status Select how users can use HTTP to access the GPON Device.
LAN allows HTTP connections to the GPON Device from the LAN.
WAN allows HTTP connections to the GPON Device from the WAN.
DENY All blocks all HTTP connections to the GPON Device.
ALLOW All permits all HTTP connections to the GPON Device.
TRUST DOMAIN permits HTTP connections to the GPON Device from the configured Trust
Domain IP address.
LAN/TRUST DOMAIN permits HTTP connections to the GPON Device from the LAN and the
configured Trust Domain IP address.
HTTP Port You may change the HTTP server port number if needed, however you must use the same
port number in order to use HTTP to connect to the GPON Device.
SSH Status Select how users can use SSH to access the GPON Device.
LAN allows SSH connections to the GPON Device from the LAN.
WAN allows SSH connections to the GPON Device from the WAN.
DENY All blocks all SSH connections to the GPON Device.
ALLOW All permits all SSH connections to the GPON Device.
TRUST DOMAIN permits SSH connections to the GPON Device from the configured Trust
Domain IP address.
LAN/TRUST DOMAIN permits SSH connections to the GPON Device from the LAN and the
configured Trust Domain IP address.
SSH Port You may change the SSH server port number if needed, however you must use the same
port number in order to use SSH to connect to the GPON Device.
Telnet Status Select how users can use Telnet to access the GPON Device.
LAN allows Telnet connections to the GPON Device from the LAN.
WAN allows Telnet connections to the GPON Device from the WAN.
DENY All blocks all Telnet connections to the GPON Device.
ALLOW All permits all Telnet connections to the GPON Device.
TRUST DOMAIN permits Telnet connections to the GPON Device from the configured Trust
Domain IP address.
LAN/TRUST DOMAIN permits Telnet connections to the GPON Device from the LAN and
the configured Trust Domain IP address.
Telnet Port You may change the Telnet server port number if needed, however you must use the same
port number in order to use Telnet to connect to the GPON Device.
To Next Page
Loading...
