Chapter 15 Interface Grouping
PMG5318-B20B User’s Guide
75
Table 54 Interface Grouping: Add
LABEL DESCRIPTION
Group Name Enter a name to identify this group. You can enter up to 30 characters. You can use letters,
numbers, hyphens (-) and underscores (_). Spaces are not allowed.
WAN Interface
used in the
grouping
Select the WAN interface this group uses.
Select None to not add a WAN interface to this group.
Grouped LAN
Interfaces
Available LAN
Interfaces
Select one or more LAN interfaces (Ethernet LAN or wireless LAN) in the Available LAN
Interfaces list and use the left arrow to move them to the Grouped LAN Interfaces list to
add the interfaces to this group.
To remove a LAN or wireless LAN interface from the Grouped LAN Interfaces, use the
right-facing arrow.
Automatically
Add Clients
With the
following DHCP
Vendor IDs
If you want LAN clients to get public IP addresses, you can list their DHCP vendor IDs here.
Apply/Save Click Apply/Save to save your changes back to the GPON Device.
To Next Page
Loading...
