MANUGENX5 - Version 1.01 24.03.2021
© 2021 0N3 s.r.l. - Subject to change without notice
10
2.3 Pairing and Unpairing Procedure with PairingAPP
PairingAPP is a pre-installed application on the Wireless Handheld that allows you to perform the pairing between the
device and any Base Station available for operation. The Wi-Fi link between a Wireless Handheld and a Base Station is
dynamic; the devices can be connected and disconnected over the time according the Pairing/Unpairing procedure.
The PairingAPP is opened at every power-up of the Wireless Handheld, but it can be resumed in any moment by press-
ing K1 and K4 keys simultaneously.
The Pairing Application let user to :
• Manage a list of Base Station devices
• Verify the Wi-Fi signal and battery levels
• Manage Pairing and Unpairing Procedure with a single Base Station
CAUTION!
• The pairing procedure wants to assure the user is aware about the Base Station he wants to establish
a safety connection. For this reason it is required for user to look at the Base Station (e.g the pairing
lamp), answer correctly to the questions, complete the procedure in a denite time (30 sec every step).
• The pairing procedure is guided by the application but requires the intervention of the operator to iden-
tify the Base Station and the conrmation on display of the required information. It is the operator’s
responsibility to complete each step of the procedure within the timeframe provided (30sec each step).
To Next Page
Loading...
Need help?
General