0N3 X5 System - Deleting a Base Station; Unpairing Procedure Steps

MANUGENX5 - Version 1.01 24.03.2021
© 2021 0N3 s.r.l. - Subject to change without notice
13
The pairing procedure can fail for the following reasons:
• Required by user with “Abort” button
• Wrong answers
• Timeout (User not entering response within the predened time) 30 seconds
In case of failure the procedure must be repeated.
2.3.6 Unpairing - Delete Base Station
Select a Base Station from the list and
press the red X button
2.3.7 Unpairing procedure
Press the Unpair button and conrm the operation by
pressing the Yes button