MANUGENX5 - Version 1.01 24.03.2021
© 2021 0N3 s.r.l. - Subject to change without notice
57
Degrees of protection and environmental tests
EN 60529:1991 + AC:1993 +
A1:2000 + A2:2013 + AC:2016
+ AC:2019
Degrees of protection provided by enclosures (IP code)
EN 60068-2-1:2007 Environmental testing Part 2-1:Tests – TestA: Cold
EN 60068-2-2:2007 Environmental testing Part 2-2:Tests – TestB: Dry heat
EN 60068-2-6:2008 Environmental testing Part 2-6:Tests – TestFc: Vibration (sinusoidal)
EN 60068-2-30:2005 Environmental testing Part 2-30:Tests – TestDb: Damp heat, cyclic (12h+ 12h cycle)
IEC 61131-2:2017 cl. 5.3.4
Programmable controllers – Part2: Equipment requirements and tests, § 5.3.4:
Free falls (according EN 60068-2-31, free fall, procedure 1.)
EN 61131-2:2017 cl. 5.3.3
Programmable controllers – Part2: Equipment requirements and tests, § 5.3.3:
Shock (according EN 60068-2-27)
Emergency Stop Button conforming to
EN 60947-5-1:2004/A1:2009 Low-voltage switchgear and controlgear
EN 60947-5-5:1997/A11:2013 Low-voltage switchgear and controlgear
EN 13850:2015 Safety of machinery - Emergency stop - Principles for design
EN 60204-1:2010 Safety of machinery. Electrical equipment of machines
Enabling Button conforming to
IEC 60947-5-1
Low-voltage switchgear and controlgear - Part 5-1: Control circuit devices and
switching elements - Electromechanical control circuit devices
EN 60947-5-1
Low-voltage switchgear and controlgear - Part 5-1: Control circuit devices and
switching elements - Electromechanical control circuit devices
UL508 Industrial Control Equipment.
CSA C22.2 N°14 Industrial Control Equipment.
IEC 60947-5-8:2006
Low-voltage switchgear and controlgear - Part 5-8: Control circuit devices and
switching elements - Three-position enabling switches
To Next Page
Loading...
Need help?
General